LED Light Bar for 6.75" led strip - image

Files (2)

LED_BAR.stl

STL

114.5 KB

LED_BAR_ends.stl

STL

45.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 15%	100% solid	Recommendation
LED_BAR.stl	Printable file	114.5 KB STL	Slice file	Slice file	Slice file	Use a 5mm brim for better adhesion
LED_BAR_ends.stl	Printable file	45.8 KB STL	Slice file	Slice file	Slice file	Use a 5mm brim for better adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

LED Light Bar for 6.75" led strip

2 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I designed this LED light bar for http://www.ebay.com/itm/301643909611?rmvSB=true Light dimensions are 172.5mm X 16.5mm. Assembled overall width is roughly 8". It mounts with 5mm screws. Some light fitment or drilling may be necessary. LED_BAR needs supports form build plate and I recommend a 5mm brim and 15% infill. May need to rotate 45 degrees depending on the size of your build plate. LED_BAR_ends 35% infill. Enjoy!