Files (4)

Cap_Body.stl

STL

338.3 KB

Cap_split_1_of_2.stl

STL

884.3 KB

Cap_split_2_of_2.stl

STL

113.0 KB

Emblem.stl

STL

1006.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Cap_Body.stl	Cover / cap	338.3 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Cap_split_1_of_2.stl	Cover / cap	884.3 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Cap_split_2_of_2.stl	Cover / cap	113.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Emblem.stl	Printable file	1006.1 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Lincoln logo 60 mm wheel cap

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

My Petrol caps went missing so I made my own. I didn't like them anyway. Two options to print. Body and emblem separate or body split in two. I prefer the second option. Just make sure to pause on layer 11 (if printing at 0.2mm height) or on 2.2mm high.