Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Lupo GTI Washer Jets

0 downloads55 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Printable replacements for the impossible to find Lupo GTI headlight washer caps. *The front surface was scanned from a genuine washer cap and is not flat so bear this mind when orientating your print. * The OEM O-Ring seems to be a little thick (Wall thickness is at minimum for SLS printing...) so worth trying to source something slightly smaller if you can. Please note that these may require some fettling to operate and fit properly. I accept no responsibility for your vehicle or any damage you cause trying to fit these items. Whilst they work on my car, I have no idea yet if these fit and work on other vehicles.