← Back to Browse Parts
Mazda 3 - Diales navegación / Navigation dials - image

Files (6)

nav_cap.stl
STL
267.9 KB
vol_2_cap.stl
STL
169.4 KB
vol_3_cap.stl
STL
147.7 KB
vol_5_cap.stl
STL
184.8 KB
vol_6_cap.stl
STL
167.5 KB
vol_cap.stl
STL
69.8 KB
Print guidance estimate
Uses saved filament metadata
Print cost & setup estimate
Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.
6 model files
Recommended kit
50g

Based on 25% main infill across listed model files

Material cost
$1.20

Filament only at roughly $24/kg PETG / ASA

Print time
2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL fileRoleSource sizePETG / ASA 20%PETG / ASA 25%100% solidRecommendation
nav_cap.stlCover / cap267.9 KB STLSlice fileSlice fileSlice fileUse PETG / ASA; check sealing faces and verify in slicer.
vol_2_cap.stlCover / cap169.4 KB STLSlice fileSlice fileSlice fileUse PETG / ASA; check sealing faces and verify in slicer.
vol_3_cap.stlCover / cap147.7 KB STLSlice fileSlice fileSlice fileUse PETG / ASA; check sealing faces and verify in slicer.
vol_5_cap.stlCover / cap184.8 KB STLSlice fileSlice fileSlice fileUse PETG / ASA; check sealing faces and verify in slicer.
vol_6_cap.stlCover / cap167.5 KB STLSlice fileSlice fileSlice fileUse PETG / ASA; check sealing faces and verify in slicer.
vol_cap.stlCover / cap69.8 KB STLSlice fileSlice fileSlice fileUse PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Mazda 3 - Diales navegación / Navigation dials

0 downloads248 views0 likes
MC

Shared by

Michael Chen
Verified

Description

Tapas personalizadas de los diales de navegación de sistema y volumen de modelos Mazda 2013-2019 (aprox) (Mazda 2, 3, 6, cx3, cx5 y mx5). Hay que quitar previamente las originales. Si no se pudieran quitar haciendo palanca con herramientas de plástico de teléfono móvil habrá que sacar los diales. Salen tirando fuerte hacia arriba con las mismas herramientas de móvil. Por detrás se ven las pestañas para desmontar las tapas. Las nuevas se pegarán con pegamento que fije bien pero permita despegar cuando sea necesario sin romper. Si se emplea cinta de doble cara se eleva demasiado. Hay varios modelos de tapa de dial de volumen: sin inscripción para cualquier modelo, con inscripción 2 para Mazda 2, 3 para 3 y cx3, 5 para cx5 y mx5 y 6 para Mazda 6. Custom caps of the system and volume navigation dials for Mazda models 2013-2019 (approx) (Mazda 2, 3, 6, cx3, cx5 and mx5). The originals must be removed beforehand. If they cannot be removed by prying them off with plastic mobile phone tools, the dials will have to be removed. They come out pulling hard up with the same mobile tools. From behind you can see the tabs to remove the covers. The new ones will be glued with glue that fixes well but allows peeling off when necessary without breaking. If double-sided tape is used, it rises too high.

Print Settings

Time: 2h
Filament: 50g
Supports: Not needed

Compatible Cars

Published Mar 9, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.