Mazda AKE fob 6mm thick 2 buttons - image

Files (2)

Cardkey-Part3.STL

STL

136.4 KB

Cardkey_-_Part_2.stl

STL

251.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Cardkey-Part3.STL	Printable file	136.4 KB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for a smooth finish
Cardkey_-_Part_2.stl	Printable file	251.4 KB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for a smooth finish

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Mazda AKE fob 6mm thick 2 buttons

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Remixed from ssh16's model. My car does not have the trunk button so my remote only has 2 buttons+horn instead of 3 buttons. Modified the original STL to remove the 3rd button.