Door_Knob_Fix.stl

STL

58.9 KB

Door_Knob_Fix_v2.stl

STL

63.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

12g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.28

Filament only at roughly $24/kg PETG / ASA

Print time

20m–33m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Door_Knob_Fix.stl	Printable file	58.9 KB STL	11g $0.25	11g $0.28	25g $0.60	Ensure proper orientation in slicer for optimal print quality
Door_Knob_Fix_v2.stl	Printable file	63.6 KB STL	11g $0.26	12g $0.28	26g $0.62	Ensure proper orientation in slicer for optimal print quality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mazda CX-7 Door Knob Fix

0 downloads33 views0 likes

Shared by

Verified

Description

The model for fixing broken mount for Knob Spring.

Updated Jul 15, 2026

Originally published on thingiverse.com by Dmitrii Gera (dgerasymiuk) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.