Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| miata-lever.STL | Primary model | 294.6 KB STL | 46g $1.10 | 50g $1.20 | 110g $2.63 | Print with supports to ensure stability |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mazda MX-5 Miata NA (1989-1997) Seat Recliner Lever
Shared by
Michael ChenDescription
NOTE: Make sure to remove the support from the inside! It's a long and thin support. You can remove it with a toothpick by prodding it until it comes loose. The file is set for the passenger seat as default. If you want the driver's side, just simply mirror it in Cura or whichever program you're using. I stood it upright and printed it with supports. You can make the layer heights finer. I just made it thick because I was prototyping it and didn't want to wait 2+ hours. This setting took around an hour and a half to print.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
