Mazda MX-5 Miata ND Phone holder for cup holder preview

Files (1)

phone holder MX5 cup holder_stabilizer LH.stl

STL

36.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / PETG 20%	ASA / PETG 25%	100% solid	Recommendation
phone holder MX5 cup holder_stabilizer LH.stl	Mount / bracket	36.8 KB STL	Slice file	Slice file	Slice file	Use a brim or raft for improved adhesion if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Mazda MX-5 Miata ND Phone holder for cup holder

0 downloads17 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

ASA or PETG for durability and heat resistance

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer, tree support recommended for the arm

Infill

20-30% infill for stability, with 2-3 walls for strength

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY-SA

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Phone holder for use with cup holder. It features an additional stabilzer which should avoid too much movement or vibration of the phone when driving fast turns. It consists of several parts. I suggest glueing the arm, base and connector. The back of the arm contains holes that can be used for zip ties to fasten the charging cable for the phone. The ball head is available in two sized 17mm and 19mm which can be used to mount e.g. a universal holder or a charging plate (with ballhead mount). The "RH" parts are for vehicles with the driver on the right side, "LH" on the left side (standard in europe). I could not test the "RH" parts but they are simply mirrored. One image shows the suggested printing orientation for best stability. Another image shows it completely assembled. For assembling you need additionally: 2x M3 nut 2x M3 screw (NOT countersunk), length 20mm The arm should be printed with tree support. I printed it using ASA filament. Enjoy it. 2024-01-29: widened part "Arm" near the head to improve stability 2024-10-18: added photo with magnetic holder 2025-04-11: added ball 15mm and 26mm.