Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
mazda mx-5 mx5 miata roof latch button fix with adjustable screw
Shared by
3DPrintedCarPartDescription
top latch fix for mazda miata mx5 i recently got a hardtop and one of the latches wouldnt stay shut so i remixed this design by Visser3 to make it more like the stock button but with a 3mm hole for a screw just like those from flyin miata. i printed one from pla to test the model since its only 5g it actually works better than expected even without the screw. i would recommend to print these out of petg or abs since pla would melt and deform from the heat and sun. if this breaks i might make a jig so i can make the stock metal button with the hole and tap it to fit the m3 bolt. i hope its usefull to you:).
Compatible Cars
Originally published on thingiverse.com by Basher Indra (basher_indra) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
