Mazda MX-5 radio fixing bracket (for Sony XAV-AX3005DB) - image

Files (1)

mx5_radio_bracket_v3.stl

STL

29.3 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

10g

Based on 25% main infill across listed model files

Material cost

$0.23

Filament only at roughly $24/kg PETG / ASA

Print time

17m–28m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
mx5_radio_bracket_v3.stl	Mount / bracket	29.3 KB STL	9g $0.21	10g $0.23	21g $0.51	Ensure a strong adhesion to the print bed to prevent warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Mazda MX-5 radio fixing bracket (for Sony XAV-AX3005DB)

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Needed to somehow fix my aftermarket radio (Sony XAV-AX3005DB) in my car (Mazda MX5, NC1). Came up with this solution, which is kind of similar to the stock radio mount (which is also only affixed on the frame). So if someone has the same combination of car/stereo, it might be useful.

Compatible Cars

Mazda MX-5

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Chr Ro (froggy1000) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.