Mazda Mx5 Mk1 Mk2 Wiper cap cover - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mazda Mx5 Mk1 Mk2 Wiper cap cover

0 downloads32 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This can be a replacement for a missing wiper cap cover on the Mazda Mx5 Mk1 or Mk2. Made using measurements from the original to match as close as possible. This is a snug fit so you might need to gently tap it in. This can be a replacement for a missing wiper cap cover on the Mazda Mx5 Mk1 or Mk2. Made using measurements from the original to match as close as possible. Printed in PLA. Use support and print with the same orientation as the pic (or rotate 90 degrees so the flat side is on the bed).

Compatible Cars

Mazda MX-5

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by (Supavitax) · License: CC BY-NC

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.1K

License: CC BY

View & download STL files