Mazda MX5 NA/NB floor mat bracket - image

Files (1)

Gancio2.3.STL

STL

143.3 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

15g

Based on 25% main infill across listed model files

Material cost

$0.36

Filament only at roughly $24/kg PETG / ASA

Print time

25m–42m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Gancio2.3.STL	Primary model	143.3 KB STL	14g $0.33	15g $0.36	33g $0.78	Ensure the hinge area is clear of supports for proper rotation

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Mazda MX5 NA/NB floor mat bracket

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a bracket that keeps is place the OEM driver's side floor mat. Sometimes it gets lost but now you can print one easily for yourself in about 1h15min with 10grams of material. It has a hinge inside that permits to rotate the little blocker on top, just like the OEM thing, but you still need an ordinary clip to fix it to the ground, in the hole under the seat. I think PLA will do the trick here but you are free to experiment with other materials.