Files (4)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| CupHolder.STL | Mount / bracket | 352.4 KB STL | Slice file | Slice file | Slice file | Print with the faceplate side up for best results |
| CupHolderLeft.STL | Choose left variant | 209.7 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
| CupHolderMM.STL | Mount / bracket | 352.4 KB STL | Slice file | Slice file | Slice file | Print with the faceplate side up for best results |
| CupHolderRight.STL | Choose right variant | 209.7 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Miata Ash Tray Cup Holder Adapter
Shared by
3DPrintedCarPartDescription
This is a new faceplate for the ahstray in older model miatas (NA models) to convert the ashtray to a cup holder. It is very secure because it uses the factory interface and it is swappable in case someone buys the car and prefers the factory parts. Simply pull out the ash tray, remove the 4 corner screws, and screw this plat in instead. I also included halves for anyone with a smaller print bed. Although you can print the halves and glue or acetone them together, I would recommend printing as one whole object if possible.
Compatible Cars
Originally published on thingiverse.com by (rundmcarlson) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
