Files (1)

Cupholder.stl

STL

530.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Cupholder.stl	Mount / bracket	530.7 KB STL	Slice file	Slice file	Slice file	Ensure a clean and dry print bed for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Miata Cupholder

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This fits into the panel holes on a gutted 1991 Mazda Miata. I assume all the panels have these holes. Only works if you don't have carpet. The print required a tiny amount of sanding for me so I bumped the pin width down 1mm for each but I haven't tested it - hopefully you won't need to shave them down at all.