Files (2)

cap.stl

STL

167.4 KB

knob.stl

STL

3.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
cap.stl	Cover / cap	167.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
knob.stl	Printable file	3.1 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Miata / Exocet Shift Knob

0 downloads23 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

3D printed in resin Hollowed (UV resin in pricey) I filled it with less expensive resin + some extra nuts and bolts for a little weight then capped with the 3d printed cap Epoxied in a metal M10 threaded insert (you can find this on ebay) Note: You may want to leave more space under the knob to fit a jam nut.