Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| buxfwC2Xgiu.stl | Accessory piece | 16.6 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| courtesy_lightm_cover_2.stl | Cover / cap | 4.0 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Miata footwell light usb adapter
Shared by
3DPrintedCarPartDescription
I made this in less than an hour and only did one revision, this is the final product basically I used a dollar tree USB adapter found here https://www.dollartree.com/e-circuit-dual-port-usb-car-chargers/264353 E-Circuit Dual Port USB Car Chargers SKU: 264353 I recommend painting and assembling this before test fitting in the car, you might get it stuck my modeling is that good.
Compatible Cars
Originally published on thingiverse.com by Zachary Tribou (Zackattack1031) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
