Files (1)

na6_tombstone_normal.stl

STL

1.0 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
na6_tombstone_normal.stl	Primary model	1.0 MB STL	46g $1.10	50g $1.20	110g $2.63	Check for proper fitment before installing, as this is an untested print

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Miata NA6 Tombstone Replica

0 downloads445 views0 likes

Shared by

Michael Chen

Verified

Description

This is a Miata NA Tombstone that I cleaned up from a 3D scan I made using a Creality CR-Scan 01. The tombstone I scanned is for a 90-93 Miata NA6. This model is currently missing mounting points and the backside isn't braced like the normal tombstone. It's missing mounting holes too, so I'll be iterating on this design over time. Still have yet to print it to test fitment (print at your own risk).

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Mazda MX-5

Published Feb 13, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.