Mini Cooper License Plate Light Lens w/ Reverse Camera Mount - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Mini Cooper License Plate Light Lens w/ Reverse Camera Mount

0 downloads35 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I created this license plate light lens for my 2005 Mini Cooper R53 since the license plate light lens I drilled into broke. I also have a backup camera and incorporated a small hole to mount the backup camera thread post through. This is a snap fit, it requires a bit of force to get the plastic clips on each end of the print into the mounting points of the license plate light. I would apply some kind of foam or raised tape around the edges to weather seal it a bit more.