Mini Cooper Powersteering Pump Control Plug - image

Files (1)

Power_Steering_Pump_Controle_Plug_With_Remover_Edge.stl

STL

22.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Power_Steering_Pump_Controle_Plug_With_Remover_Edge.stl	Primary model	22.0 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Mini Cooper Powersteering Pump Control Plug

0 downloads63 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This connector plug fits the control port on a electric power steering pump to 02-08 Mini Cooper's. The units have 3 control pins and a main 12v power plug. To start the pump, pin-1 needs to be connected to 12v+, and then pin-2 needs only be temporary pulsed once on 12v+ for a second or two. In other words pin-1 should be connected to your ignition switch and pin-2 connected to your distributor so that the pump only starts once the engine is running. This pump makes for a good custom electric power steering conversion in hot rod applications. If you need the main power connector there's one here --> https://www.thingiverse.com/thing:4668634