Files (1)

EVO-10.stl

STL

639.9 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 40% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PLA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PLA 20%	PLA 40%	100% solid	Recommendation
EVO-10.stl	Primary model	639.9 KB STL	37g $0.89	50g $1.20	88g $2.12	Print no thicker than 0.6mm for flexibility

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Mitsubishi EVO Stencil

0 downloads174 views0 likes

Shared by

Michael Chen

Verified

Description

Simple stencil of my friends Mitsubishi Evo. Must be printed no thicker than .6mm to be flexible like store bought stencils. PLA is preferred and wont shatter (hopefully) I made mine with cheap 3DMars PLA. Do not use any infill - just add a few top or bottom layers and scale to prefrence.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Mitsubishi (all models)

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.