Mocowanie odbojnika peugeot 508 SW (trunk shock absorber mount) - image

Files (1)

peugeot_508_mocowanie_odbojnika.stl

STL

45.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
peugeot_508_mocowanie_odbojnika.stl	Primary model	45.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Mocowanie odbojnika peugeot 508 SW (trunk shock absorber mount)

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Mocowanie zastępcze odbojnika bagażnika dla Peugeot 508 SW. Oryginalne mocowania często się łamią. Odcinamy pozostałości od starego mocowania i śrubą od dołu (miejsce wejścia wkrętu) przykręcamy zaczep do odbojnika. Replacement boot bumper mount for Peugeot 508 SW. The original fasteners often break. Cut off the remnants of the old fastening and use the screw from the bottom (screw entry point) to screw the catch to the bumper.