Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| horn-object-Cut.stl | Printable file | 1.0 MB STL | Slice file | Slice file | Slice file | Apply a layer of aluminum tape and two M6 washers for proper electrical contact |
| MOMO_Mazda_Horn_button-1.8mm-logo.stl | Printable file | 1.1 MB STL | Slice file | Slice file | Slice file | Apply a layer of aluminum tape and two M6 washers for proper electrical contact |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Momo 42.8mm Mazda horn button
Shared by
3DPrintedCarPartDescription
This is a custom horn button I made for my RX7's Momo Nero steering wheel. It replaces the center horn button and brass dome insert. You will need to apply a layer of aluminum tape and two m6 washers to ensure proper electrical contact. The logo and horn symbols are raised 1.6 from the button surface and printed in PETG. This was also scaled down from 45 mm to 42.8 in order to fit inside the momo horn button assembly. It is strongly recommended that you use a caliper to measure the horn button you are replacing. I also included a horn symbol STL since the original Momo button has that symbol.
Compatible Cars
Originally published on thingiverse.com by John Cargo (jacargo) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
