Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | ABS / ASA 20% | ABS / ASA 100% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
MR2 Spyder headlight replacement tab
Shared by
3DPrintedCarPartDescription
This is a replacement part for a broken top tab on MR2 Spyder facelift (03+) headlights. For pre-facelift headlights, Toyota sells a replacement tab. ###Instructions - Print with 100% infill and without supports. You should print in ABS or Nylon. The temperatures inside the care are to high for PLA. This is for the right headlight, invert for the left one. - Remove the included support from inside the screw cylinder. - Trim the remaining parts of the broken tab. - Screw the replacement tab using two 11mm long and 4 mm wide screws for plastic (see picture). Edit: I have improved the designed for more strength.
Compatible Cars
Originally published on thingiverse.com by (xavierandrade) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
