Files (1)

MR2_Engine_Lid_Prop_Clip.stl

STL

97.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
MR2_Engine_Lid_Prop_Clip.stl	Clip	97.7 KB STL	Slice file	Slice file	Slice file	Print with the circular opening facing sideways

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

MR2 SW-20 Engine Prop Clip

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a clip for the engine lid of the Toyota MR2 SW-20. The original clip breaks easily so I made this replacement. I printed it on it's side with support material. The circular opening should be facing sideways while printing. I printed at.1mm layer height but you could print at whatever. Infill doesnt matter because its such a thin part. Printing with 2 walls is plenty.

Compatible Cars

Toyota MR2

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Christian Gotsch (pieindaface) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.