Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Mustang Pony Emblem

0 downloads58 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is the Mustang pony emblem scanned and cleaned up with Fusion360 for 3D Printing. The printed size is very close to the original emblem on the Ford Mustangs from the 1960's. From the pictures above, the large emblem is at 100% and the smaller one is at 50%. I printed these examples at.2 mm. Update: I've uploaded a vertical version of the emblem. Please print with Brim and Supports. The result is much better than laying flat.