Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
MX-5 NB Window Switch-cover
Shared by
3DPrintedCarPartDescription
I used to own a MX-5 NB. Beautiful little cars, but they have a couple of downsides. One of those downsides is that the windows-switches tend to fail. Internally something just wears out. You end up with a window that's rolled down, but won't come up anymore. On the internet I found this mod where you can use simple 2-pole switches. With a little re-wiring these were perfectly usable as a replacement. I was left without a proper cover. So for that I designed this 'Thing'. I always liked the original idea by revlimiter, but my design worked more that adequate. I chose to forego on the mounting bolts and use a small drop of superglue instead. Never came off but was easily removable when it was called for. More tweaking info: http://revlimiter.net/mods/nb_window_install.php and http://mazdaroadster.net/showthread.php?1719-DIY-Power-Window-Switch-Info Switch-type I used: http://www.ebay.com/itm/Heavy-Duty-20A-125V-DPDT-2-Pole-Double-Throw-6-Terminal-On-Off-On-Toggle-Switch-/121427723277
Compatible Cars
Originally published on thingiverse.com by Boy (Pointy) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
