Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Miata_RedBull_Can_interface.STEP | Printable file | 431.9 KB STEP | Slice file | Slice file | Slice file | Printing upside-down with a raft may reduce support material and print time |
| Miata_RedBull_Can_interface.STL | Printable file | 528.6 KB STL | Slice file | Slice file | Slice file | Printing upside-down with a raft may reduce support material and print time |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
NA Miata 8oz Red Bull Can Holder
Shared by
3DPrintedCarPartDescription
This is a adapter to hold an 8oz red bull can in an NA miata cup holder. Do not print this in PLA and leave it in your car, because it will shrink. ABS or PETG should work in a hot car. I printed this top side up, which used alot of support for the bottom which worked fine, but took longer. I believe it should work being printed upside-down, but you may have an issue with the curve in the tabs not connecting fully, but shouldn't require supports and should print quicker. I have not tried it upside down and support-less. I would use a raft, though, to help support the tab. Update: printed it upside down with a raft and no supports and it printed fine.
Compatible Cars
Originally published on thingiverse.com by Jason Martin (fastiva) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
