Files (1)

NA_Miata_Glovebox_Gauge_Holder.STL

STL

128.5 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

14g

Based on 25% main infill across listed model files

Material cost

$0.34

Filament only at roughly $24/kg PETG / ASA

Print time

25m–41m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
NA_Miata_Glovebox_Gauge_Holder.STL	Mount / bracket	128.5 KB STL	13g $0.32	14g $0.34	31g $0.76	Ensure a tight fit by printing with minimal warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

NA Miata Glovebox Gauge Holder

1 downloads36 views0 likes

Shared by

Alfred

Verified

Description

This holder fits two 52mm gauges. I wanted to relocate my gauges out of my radio pocket and away into the glovebox as they are just for reference. The fit is very tight and does not require any mounting hardware, tape, etc. No rattles are noticed by me when driving.

Compatible Cars

Mazda MX-5

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Kyle Reutenauer (OffbeatTacos) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.