Nissan 300ZX (Z32) T-top handles - image

Files (1)

handle_v5.stl

STL

28.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 50%	100% solid	Recommendation
handle_v5.stl	Primary model	28.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Nissan 300ZX (Z32) T-top handles

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Fair Warning I have not printed the passengers side handle. I just did a mirror image of the drivers side. *Background*: Have a 95 300ZX with a broken drivers side T-top handle. The internet has limited replacement parts and no new production handles. *Printing Considerations*: The main center hole and the square hole for the latch will require supports in your slicer app. The other holes, including the rectangle were able to be printed just fine without supports. My 3D guru went with 50% infill @.2mm resolution. *Known Issues*: The tolerances for the holes were a little much so the handle moves around a bit more than OEM.