Nissan Leaf Battery Pack Terminal Cover - image

Files (3)

Terminal_Cover_Bottom_Rev2.stl

STL

438.7 KB

Terminal_Cover_Middle_Bottom_Combo_Rev1.stl

STL

424.4 KB

Terminal_Cover_Middle_Rev2.stl

STL

301.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Terminal_Cover_Bottom_Rev2.stl	Cover / cap	438.7 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Terminal_Cover_Middle_Bottom_Combo_Rev1.stl	Cover / cap	424.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Terminal_Cover_Middle_Rev2.stl	Cover / cap	301.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Nissan Leaf Battery Pack Terminal Cover

0 downloads52 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a set of files for creating a terminal cover for a custom, 5-pack Nissan Leaf battery. We used this terminal cover for our PPPRS battery for the 2016 Race in Detroit. The posted files include mods that I would have preferred while I was designing the piece. If you would like the original files as shown in the images, download the.zip file. These components are a mix between 3D printed and laser cut parts: 1. Bottom (3D Printed): Bracket with captive nuts (6/32) that slides over the battery terminals and is held via friction, battery terminal latches and copper interconnects. 2. Middle (3D Printed or Laser Cut): Spacer piece between the bottom and top. 3. Top (Laser Cut): ~1/4" clear acrylic cover *EDIT* I added a bottom-middle combo piece that may be printed as a single piece as opposed to the 2 separate bottom and middle pieces.