Files (1)

LockleyLeafCharger.stl

STL

51.7 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

11g

Based on 25% main infill across listed model files

Material cost

$0.27

Filament only at roughly $24/kg PETG / ASA

Print time

19m–32m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
LockleyLeafCharger.stl	Primary model	51.7 KB STL	10g $0.25	11g $0.27	24g $0.58	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Nissan Leaf charger mount

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

EVSE Charger mount. Catalog note: Nissan Leaf charger mount is a 3D-printable car-part listing indexed for classified fitment Nissan Leaf. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.