Files (2)

NLFCM_R_V1.stl

STL

50.2 KB

NLFCM_V1.stl

STL

38.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
NLFCM_R_V1.stl	Printable file	50.2 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping
NLFCM_V1.stl	Printable file	38.2 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Front Bumper

Nissan Leaf: Front camera mount

0 downloads48 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

UPDATE: New design for the more common 'round' cameras see the NLFCM_R_V1 file. Do you have a Nissan Leaf and wish you had a front camera like the Tekna does? Well you’re in luck, as I have developed a precisely fitting mount for a standard wireless car reversing camera. The wireless camera kit costs about £20 on ebay, then you can duplicate the great rear camera system for the front, all without permanently modifying the car at all, so great for if you’re leasing the Leaf. If you don't have a 3D printer but would like one, please leave a comment:).