Nissan Leaf Gen2 battery terminal and cover - image

Files (10)

15mm_drill_template_Nissan_Leaf_Cell.stl

STL

92.2 KB

20mm_drill_tmplate_Nissan_Leaf_Cell.stl

STL

92.4 KB

Cover_2.stl

STL

56.1 KB

Cover_6.stl

STL

82.6 KB

Cover_7.stl

STL

82.3 KB

Leaf_Gen2_spacers.stl

STL

91.8 KB

Nissan_Leaf_Batt_cover_closed.stl

STL

26.7 KB

Nissan_Leaf_Batt_cover_open.stl

STL

26.4 KB

Nissan_Leaf_Battery_cover_1.stl

STL

27.7 KB

Nissan_Leaf_Battery_cover_2.stl

STL

26.4 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

10 model files

Typical selected file

10g

Based on 10% main infill for the largest likely-needed model file

Material cost

$0.24

Filament only at roughly $24/kg PETG

Print time

17m–28m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG 20%	PETG 10%	100% solid	Recommendation
15mm_drill_template_Nissan_Leaf_Cell.stl	Printable file	92.2 KB STL	12g $0.29	10g $0.24	29g $0.68	Use a 0.4 or 0.8mm nozzle for printing
20mm_drill_tmplate_Nissan_Leaf_Cell.stl	Printable file	92.4 KB STL	12g $0.29	10g $0.24	29g $0.68	Use a 0.4 or 0.8mm nozzle for printing
Cover_2.stl	Cover / cap	56.1 KB STL	10g $0.25	9g $0.21	25g $0.60	Use PETG; check sealing faces and verify in slicer.
Cover_6.stl	Cover / cap	82.6 KB STL	12g $0.28	10g $0.23	28g $0.66	Use PETG; check sealing faces and verify in slicer.
Cover_7.stl	Cover / cap	82.3 KB STL	12g $0.28	10g $0.23	28g $0.66	Use PETG; check sealing faces and verify in slicer.
Leaf_Gen2_spacers.stl	Printable file	91.8 KB STL	12g $0.29	10g $0.24	28g $0.68	Use a 0.4 or 0.8mm nozzle for printing
Nissan_Leaf_Batt_cover_closed.stl	Cover / cap	26.7 KB STL	9g $0.21	7g $0.17	21g $0.50	Use PETG; check sealing faces and verify in slicer.
Nissan_Leaf_Batt_cover_open.stl	Cover / cap	26.4 KB STL	9g $0.21	7g $0.17	21g $0.50	Use PETG; check sealing faces and verify in slicer.
Nissan_Leaf_Battery_cover_1.stl	Cover / cap	27.7 KB STL	9g $0.21	7g $0.18	21g $0.51	Use PETG; check sealing faces and verify in slicer.
Nissan_Leaf_Battery_cover_2.stl	Cover / cap	26.4 KB STL	9g $0.21	7g $0.17	21g $0.50	Use PETG; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Nissan Leaf Gen2 battery terminal and cover

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Make you own PV storage battery from Nissan Leaf Gen2 cells. Battery terminal brackets for Nissan Leaf Gen2 cells. 4 different terminal blocks for arranging your cells and bus bars, open or closed Spacers for the cells from which you removed the metal brackets with the screws Covers for 2-6-7 cells End plate template to watercut/laser metal And 2 drill templates for 15mm and 20mm bus bars to drill the holes terminal brackets are are remix of https://www.thingiverse.com/thing:3577120 Printed in Pet-G, 0.4 or 0.8mm nozzle, 1-2 outer layers for a 0.8mm nozzle, 15% infill.