Nissan Leaf Grocery Bag Clip-childseat clip - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Nissan Leaf Grocery Bag Clip-childseat clip

0 downloads41 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This clip fits into one of the three child seat safety clips that are on the back of the rear seats in the Nissan Leaf. It allows plastic or re-usable grocery bags to be easily clipped in and removed so that they do not roll around in the trunk. It will fit into other cars, it really only is for child seat clips that are close to vertical, not the ones that are horizontal. The diameter of the bar that it clips onto seems pretty standard, but the depth of the bar from the surface may require a little tweaking. One part of the design is deliberately made thin so that it can bend to accommodate slightly different depths.