Nissan Leaf Nextbase Dashcam Mirror Mount - image

Files (3)

Cam_Mount.stl

STL

28.2 KB

Leaf_Mirror_Mount.3mf

3MF

31.3 KB

Leaf_Mirror_Mount.stl

STL

74.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 35%	100% solid	Recommendation
Cam_Mount.stl	Mount / bracket	28.2 KB STL	Slice file	Slice file	Slice file	Ensure a strong bond between the two parts with glue
Leaf_Mirror_Mount.3mf	Mount / bracket	31.3 KB 3MF	Slice file	Slice file	Slice file	Ensure a strong bond between the two parts with glue
Leaf_Mirror_Mount.stl	Mount / bracket	74.1 KB STL	Slice file	Slice file	Slice file	Ensure a strong bond between the two parts with glue

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mirror Covers

Nissan Leaf Nextbase Dashcam Mirror Mount

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Using the Nextbase Cam mount made by Antilo, I've made a part that fits a Gen 2 Nissan Leaf (2018) that fits inside the mirror where it attached to the window. No sticky pad required, but glue required to fit the two parts together. Camera is center of car. Nice and neat, and can't see it from the drivers position. Printed 100% infill.