OBD2 + CarPlay Mount for Mini Cooper - image

Files (3)

Mount_Carplay.obj

OBJ

1.3 MB

Mount_OBD2.obj

OBJ

614.9 KB

Tach_Mount_v2.3.obj

OBJ

1.2 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Mount_Carplay.obj	Mount / bracket	1.3 MB OBJ	Slice file	Slice file	Slice file	Use gentle screwing to avoid damaging the plastic part
Mount_OBD2.obj	Mount / bracket	614.9 KB OBJ	Slice file	Slice file	Slice file	Use gentle screwing to avoid damaging the plastic part
Tach_Mount_v2.3.obj	Mount / bracket	1.2 MB OBJ	Slice file	Slice file	Slice file	Use gentle screwing to avoid damaging the plastic part

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

OBD2 + CarPlay Mount for Mini Cooper

0 downloads52 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I created a tach mount for a CarPlay/Android Auto screen that uses a standard 17mm ball, as well as an OBD2 screen that shows me the Temperature/Revs/Speed/12V. It mounts to the official mini mount for the tach, note that this is a plastic part so be gentle with the screws when installing. My specific Mini model is the Mini Cooper S 2010 but it should work with all the R models afaik I have also decomposed the file into an OBD2 Mount, a Carplay Mount or a combined mount so you can just grab the one that you need.