Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| FINAL_op5-stand-tilted.stl | Primary model | 508.8 KB STL | Slice file | Slice file | Slice file | Ensure the mount is oriented to minimize supports in your slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Oneplus 5 Phone Car Mount for BMW vehicles
Shared by
3DPrintedCarPartDescription
I tweaked the design to work with my old OnePlus 5 - which I no longer use. Props to original creator for finding that notch to mount this into on dash. I found it worked best printed in PETG as after a hot day, the PLA one warped really bad. I've also added some legs to stop it wobbling when you press the screen. Also raised the edges and tilted it to keep the phone in when giving it the beans.:).
Compatible Cars
Originally published on thingiverse.com by Wes Moore (Mistawes) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
