Files (2)

0.75_Cover.stl

STL

17.2 KB

ASTRA_H_Clip.stl

STL

27.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
0.75_Cover.stl	Cover / cap	17.2 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
ASTRA_H_Clip.stl	Clip	27.1 KB STL	Slice file	Slice file	Slice file	Ensure a good first layer adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

Opel Astra "A" Pillar trim clip

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This clip fits the right hand A pillar trim which has a clip with AIRBAG on it. This is just a clip and when removed the break easily. So I took the right hand side and designed a replacement. To use for the left side just reverse/mirror the 3D model in Cura or any other software. The 0.75mm cover can be glued on after as this allows a good finish print so once the clip is locked into place simply glue on for final finished look.