Opel corsa c 2-din Frame with switches and volt meter - image

Files (1)

auto_cover.stl

STL

158.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
auto_cover.stl	Cover / cap	158.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Opel corsa c 2-din Frame with switches and volt meter

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Custom radio frame to replace stock opel corsa c radio. has 1-din slot and is a tight fit. has holes for 4 switches and a voltmeter/display print in pet-g or other heat resistant fiment. dont use pla used in this project car: https://youtu.be/tFyJht5Cblw

Compatible Cars

Opel Corsa

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by robbert loos (scanlight) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.