Files (1)

MittelkonsoleKNopp-Body.stl

STL

8.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
MittelkonsoleKNopp-Body.stl	Primary model	8.7 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Opel Omega center console lever

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

2 piece (use mirror) replacement for the center console lever that breaks of on every Omega Facelift. I used a small neodymium magnet to keep the cover closed wen pulling up the whole.. well thing;-) Just look at the images 2 pieces are simply glued together with super glue and then painted, if you have a "brown" interior, it's RAL 8019 BTW.