Opel / Vauxhall Adam armrest strengthen insert - image

Files (1)

part.stl

STL

248.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 15%	100% solid	Recommendation
part.stl	Primary model	248.2 KB STL	Slice file	Slice file	Slice file	Ensure a snug fit by grinding the part if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Opel / Vauxhall Adam armrest strengthen insert

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I mounted a armrest in my Opel Adam. Nice add on but quit rickety. This insert is placed into the parts attached to the console. Now it is much more firmer. The printed part is a little bit to big,it can be grinded back to make a snug fit (see picture). You need a longer m8 to attach the part to the armrest I printed in PET to stand the summer heat. Infill 10%.