Opel / Vauxhall Adam trunk speaker adapter - image

Files (2)

adapter.stl

STL

4.1 MB

clip_v2.stl

STL

54.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
adapter.stl	Printable file	4.1 MB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping.
clip_v2.stl	Clip	54.2 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Opel / Vauxhall Adam trunk speaker adapter

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I added speakers to my audio system. Did not want to make holes in parcel shelf or add a box containing speakers to the luggae room. These adapters can be attached to the inside of the grids / doors in the trunk. 4 x 6 inch oval speakers fit on these. No need to drill. I did remove some of the clips for holding the insulation.