Opel / Vauxhall Insignia A Sports Tourer parcel shelf insert clip - image

Files (5)

Inkku_bottom.stl

STL

13.6 KB

Inkku_bottom_wide.stl

STL

13.0 KB

Inkku_top.stl

STL

45.0 KB

Inkku_top_wide.stl

STL

33.3 KB

Inkku_wedge.stl

STL

15.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

5 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Inkku_bottom.stl	Accessory piece	13.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Inkku_bottom_wide.stl	Accessory piece	13.0 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Inkku_top.stl	Printable file	45.0 KB STL	Slice file	Slice file	Slice file	Rotate the wedge 90° if printing flat does not produce a stiff enough part
Inkku_top_wide.stl	Printable file	33.3 KB STL	Slice file	Slice file	Slice file	Rotate the wedge 90° if printing flat does not produce a stiff enough part
Inkku_wedge.stl	Accessory piece	15.7 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Opel / Vauxhall Insignia A Sports Tourer parcel shelf insert clip

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Clip for Opel / Vauxhall Insignia A Sports Tourer parcel shelf insert. 3 piece clip, wedge in the middle. Use whatever settings and material that can survive in the car. If your shelf is torn around the clip, you might want a wider part. (Pictures from wide part) Try rotating the wedge 90°, if printing it flat will not produce a stiff enough part.

Compatible Cars

Opel Insignia

Updated Jul 15, 2026

Originally published on thingiverse.com by Martti Lokka (Martti) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.