Opel / Vauxhall Meriva bottle / can adapter for smaller cola and energy drink cans - image

Files (1)

Dosenadapter_66.5_auf_54mm_v4.stl

STL

76.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Dosenadapter_66.5_auf_54mm_v4.stl	Primary model	76.0 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Opel / Vauxhall Meriva bottle / can adapter for smaller cola and energy drink cans

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Sometimes I have some small coke cans or some energy drink cans (the flying one) in my car. Often, when I have a turn to drive, the can falls out and the floor gets wet. This is a simple reducer. It fits to the original cup holder and bewares the can of falling. Now version 4 is online which supports 250ml and 330ml cans. I still don't know the reason, but the top was a little bit sharp in my case. If so, use a file or a peace of sanding paper to fix it. Sketchup-file is included. Feel free to modify it.