Files (2)

wheel_hub_cap_OPEL_badge.stl

STL

896.4 KB

wheel_hub_cap_OPEL_badge_drill_guide.stl

STL

211.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
wheel_hub_cap_OPEL_badge.stl	Cover / cap	896.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
wheel_hub_cap_OPEL_badge_drill_guide.stl	Cover / cap	211.2 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

OPEL Wheel Hub Cap Badge

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is an OPEL badge for generic 4€ 15 inch wheel hub caps (Brand is DELTA i think), so it doesn't look as cheap. The center diameter of the hubcap is 66mm, and the drill guide fits perfectly into it. I drilled two 3.5mm holes into the hubcap, shoved the pins of the badge through and melted them flat on the backside using a soldering iron. If the your hubcap design is different, and you need to drill your own holes, the pins are 45mm apart. If you like my model feel free to spend me a beer;) Cheers!