Files (2)

BT_adapter_iphone_6.stl

STL

6.4 MB

BT_adapter_S8.stl

STL

5.5 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
BT_adapter_iphone_6.stl	Printable file	6.4 MB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to prevent warping
BT_adapter_S8.stl	Printable file	5.5 MB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Phone Cradle for VW

0 downloads66 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is for anyone "unlucky" enough to have the dash mounted Bluetooth adapter in their Volkswagen. We upgraded the old head unit to an RCD330 initially for carplay, turns out it also has inbuilt Bluetooth, so didn't need to rely on the Bluetooth adapter anymore for phone calls. This "Thing" is essentially a remix of the adapter. It utilises the fixed base (which is Bury) and becomes a phone cradle for either a iPhone 6 or Galaxy S8. FYI only the charge port hole is required because the mic in the head unit works great. Cheers.