Phone Cradle mount for B7 A4 with Panavise 75102-607 - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 60%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Phone Cradle mount for B7 A4 with Panavise 75102-607

0 downloads43 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Designed from scratch in TinkerCad using basic shapes Cell phone cradle mount for PanaVise 75102-607 plate. The PanaVise plate is designed to work with Audi A4 B7 and is screwed in behind the stereo. I needed a way to mount my cell phone cradle to it. Holes matched up and proper fitment for screws and bolts. My local hardware store ran out of metric screws, so I used 6-32 x 1/2 screws and nuts. I printed the first one with 20% infill and it broke. So I reinforced the stem and printed with 100% infill. It's 6mm thick to combat road vibrations and does a decent job at it.