Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ShiftKnob_Plain.stl | Primary model | 197.0 KB STL | Slice file | Slice file | Slice file | Ensure proper thread alignment during printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Plain "Cueball Style" Shift Knob (threaded for VW - M12x1.5)
Shared by
3DPrintedCarPartDescription
This is simply a basic shift knob I designed in TinkerCAD and printed for my mk3 VW Cabrio. Will fit many other VWs with similar thread pattern. For me, I heated up the metal threaded shaft with a heat gun before screwing it on to help the threads seat better. NOTE: if printing in PLA, be aware that the heat inside a car may cause warping. I printed mine in wood and covered with a thick stain/lacquer and it has held up OK.
Compatible Cars
Originally published on thingiverse.com by Benjamin Williams (maketoast) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
