Plug in the aerodynamic arch of the trunk KIA Sportage 2014 - image

Files (1)

Kia.stl

STL

64.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Kia.stl	Primary model	64.2 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Plug in the aerodynamic arch of the trunk KIA Sportage 2014

0 downloads99 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A friend asked to print a cap in the railing on his Kia Sportage 2014. Of course, it was not possible to repeat the structure of the original stub perfectly))))) But as an alternative, it’s not very bad at all))))) Друг попросил распечатать заглушку в рейлинг на его Kia Sportage 2014. Идеально повторить структуру оригинальной заглушки конечно не получилось))))) Но как альтернатива вполне себе даже очень не плохо получилось))))).