Files (4)

911_RSR_Body.stl

STL

1.6 MB

GT3_Tyre_Mould.stl

STL

1.3 MB

911_wheel.stl

STL

287.0 KB

911_RSR_Chassis.stl

STL

75.2 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
911_RSR_Body.stl	Printable file	1.6 MB STL	Slice file	Slice file	Slice file	Scale wheels to 25% as instructed
GT3_Tyre_Mould.stl	Printable file	1.3 MB STL	Slice file	Slice file	Slice file	Scale wheels to 25% as instructed
911_wheel.stl	Printable file	287.0 KB STL	Slice file	Slice file	Slice file	Scale wheels to 25% as instructed
911_RSR_Chassis.stl	Printable file	75.2 KB STL	Slice file	Slice file	Slice file	Scale wheels to 25% as instructed

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Porsche 911 RSR

0 downloads165 views0 likes

Shared by

Michael Chen

Verified

Description

Everything should be resin printed except the chassis (which should be PLA). ALSO,,,,, Please note, due to Sketchup not liking very small dimensions, the wheels should be printed at 25% Unless stated, superglueand accelerator should be used and threadlock glue may be needed for the contrate gear (depending on make used). Glue the "T" piece between the top chassis rails. Cut a 6mm length of 1.2mm wire for the guide pin and glue into the front hole flush with the top surface.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Porsche (all models)

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.1K

License: CC BY

View & download STL files